UL/UK - Direct operated spool valves

Download technical datasheet

The direct operated solenoid valves of the UL series size 32 mm are manufactured in compliance with the European directives EEC 89/336, EEC 92/31, EEC 93/68, EEC 73/23 in the 3/2 normally open (supply through exhaust "3") and 3/2 normally closed versions. The 2/2 version can be obtained by closing the exhaust "3". Versions with 1/8" thread for single installation, and versions with interface for mounting on fixed position multiple subbases or on valve bodies (CETOP/RP32P) are available.

➜ Materials and components

• HOSE: IMRE
• G1/8 THREADED BODY: Zamak
• BODY WITH INTERFACE: Nylon filled with verren(Zamak on request)
• SPRING: Stainless steel
• SEALS : Viton
• MANUAL CONTROL: Acetal resin

➜ Application range: filtered compressed air (with or without lubrication).

• Maximum frequency: ≤ 13 Hz
• Service life: 50 million cycles at 6 bar (with optimal operating conditions)
• Nominal diameter: 2 mm
• Coil: integrated in the body
• Standard voltage: 24V DC, 24 V - 110 V - 220 V AC
• Power: DC 7 W / AC 17 VA (peak)
• Voltage tolerance: ± 15
• Working pressure: 0 ÷ 10 bar
• Working temperature: 0 ÷ +50° C (- 20° C with dry air)
• Duty cycle: ED 100%.
• Insulation class: F
• Protection class: IP65
• Electrical connector: code: ULR1B