Universal double cone fittings

Download technical datasheet

➜ Installation instructions
1. Cut the tube at 90° and deburr it.
2. Oil the threads of the nut and of the body of the coupling.
3. Screw the nut on by hand until a certain resistance of the ring is obtained.
4. Check that the pipe is completely in contact with the fitting, forcing the pipe towards the inside of the fitting, then use the spanner to lock the pipe.
5. 5. Tighten the nut by turning it 1 turn 1/4 or 1/2 and if necessary, make a tightening mark.

➜ Materials and components
Universal couplings with a two-cone ring are made of non-nickel-plated brass:
1 - fitting body
2 - bicone ring
3 - nut

➜ Field of application: compressed air, oil, water

➜ Pressures:
- Maximum working pressure: depending on pipe diameter and material, see table on catalogue

➜ Temperature:
- Minimum temperature: - 40°C
- Maximum temperature: + 100°C

➜ Threads: female BSP cylindrical, male BSP tapered or BSP cylindrical with mounted o-ring

➜ Standards: REACH 1907/2006, 2011/65/EC