3/8" microsol standard 24VDC solenoid valve

Helpful information:

TECHNICAL CHARACTERISTICS OF THE BLOCK - FR + L / F + R + L

• Connection : G 3/8" (available on request in G1/2" : series 052)
• Flow rate : 1500 Nl/min (P = 6,3 bar - Δp = 1 bar)

• 3-way shut-off valve (V 050-25)
• Filter (F 050-12)
• Regulator (R 050-11)
• Filter-regulator (FR 050-14)
• Solenoid valve of sectioning (E 050-26)
• Soft starter (D 050-27)
• Standard lubricator (L 050-13)
• Vacuum filling lubricator (L 050-13VL)

• Used to cut off the air supply and at the same time to discharge the downstream circuit.
  - The blocking device is particularly useful during maintenance operations. It prevents the unauthorized pressurization of the system.
  - Possibility of wall mounting using the holes provided.
  - Discharge connection: 1/4" BSP female thread.
  - Maximum inlet pressure: 12.5 bar = 180 Psi = 1.25 MPa.
  - Temperature range: 5° to 50° C.
  - The device is delivered with a padlock.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2580 Nl/min.
  - Weight : 0,270 Kg.

  Download technical datasheet

• - Very good condensation separation.
  - Low pressure drop.
  - Provided with holes for wall mounting.
  - Quick attachment of the cup with anti-pull-out safety mechanism.
  - Standard filtration degree of 20 microns (on request 5 microns).
  - Manual and semi-automatic condensate draining device in the standard integrated (SS) or automatic float (SA) version.
  - Polyamide bucket with reinforced resistance and external protection.
  - Quantity of condensation recovered: 42 cm3.
  - Maximum operating pressure: 12.5 bar = 180 Psi = 1.25 MPa.
  - Temperature range: 5 to 50°C (41 to 122°F).
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2500 Nl/min.
  - Weight : 0,225 Kg.

  Download technical datasheet

• - Rolling diaphragm.
  - Stability of the regulated pressure, even if the upstream pressure varies.
  - High flow rate with low pressure drop.
  - Rapid elimination of excess pressure downstream.
  - Provided with holes for wall or bracket mounting.
  - Knob with regulation locking device.
  - Built-in automatic pressure relief.
  - Pressure gauge connection: 1/8" BSP female thread.
  - Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar .
  - Maximum inlet pressure: 12,5 bar = 230 Psi = 1,60 MPa.
  - Temperature range: from 5° to 50° C.
  - Reference flow rate (P = 6,3 bar - Δp = 1 bar) : 2100 Nl/min.
  - Weight : 0,325 Kg.

  Download technical datasheet

• - Rolling diaphragm.
  - Stability of the regulated pressure, even if the upstream pressure varies.
  - High flow rate with low pressure drop.
  - Rapid elimination of excess pressure downstream.
  - Provided with holes for wall or bracket mounting.
  - Knob with regulation locking device.
  - Built-in automatic pressure relief.
  - Pressure gauge connection: 1/8" BSP female thread.
  - Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
  - Very good condensation separation.
  - Quick coupling of the bucket with anti-extraction safety mechanism.
  - Other functional characteristics as for the standard filter.
  - Reference flow rate (P = 6,3 bar - Δp = 1 bar): 2100 Nl/min.
  - Weight: 0,410 Kg.

  Download technical datasheet

• Device allowing to cut off the power supply and at the same time to unload the downstream circuit by means of a remotely operated electro-pneumatic control (NF).
  - Available with CNOMO (standard) or MICROSOL control.
  - Electrical voltage: 24V DC (standard), 24V AC or 220V AC.
  - Available with pneumatic control on request.
  - Possibility of wall mounting using the holes provided.
  - Connection for discharge: 1/4" BSP female thread.
  - Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
  - Maximum working pressure: 10 bar = 145 Psi = 1 MPa.
  - Temperature range: 5° to 50° C.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2580 Nl/min.
  - Weight : 0,280 Kg.

  Download technical datasheet

• Gradual pressurization of the system up to operating pressure.
  - Before the maximum available pressure is released, air is slowly introduced into the downstream circuit until 60% of the upstream pressure is reached.
  - To adjust the pressurization time, use the built-in flow regulator.
  - Provided with holes for wall mounting.
  - Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
  - Maximum working pressure: 10 bar = 145 Psi = 1 MPa.
  - Temperature range: 5 to 50°C (41 to 122°F).
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2580 Nl/min.
  - Weight : 0,270 Kg.

  Download technical datasheet

• Proportional oil mist type.
  - Constant lubrication over time.
  - Guaranteed operation even at low flow rates.
  - Fine adjustment of the quantity of lubricant.
  - 360° drip display.
  - Oil filling plug.
  - Quick attachment of the bucket with anti-pull-out safety mechanism.
  - Provided with holes for wall mounting.
  - Polyamide bucket with reinforced resistance, with external protection, capacity 68 cm3.
  - Recommended oil viscosity: ISO VG32.
  - Maximum working pressure : 12,5 bar = 180 Psi = 1,25 MPa.
  - Temperature range: 5° to 50° C (41° to 122° F).
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2060 Nl/min.
  - Weight : 0,230 Kg.

  Download technical datasheet

• Indispensable when you want to load the oil quickly and safely without interrupting the normal operation of the system.
  - Filling is controlled by holding down the button on the base of the grease gun body.
  This causes a vacuum inside the bowl, which allows the oil to be sucked in.
  - The flow stops only when the button is released.
  - The oil level must be checked visually.
  - Minimum activation pressure: 3 bar = 40 Psi = 0.3 MPa.
  - Other functional characteristics as for the standard model.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2060 Nl/min.
  - Weight : 0,270 Kg.

  Download technical datasheet