Pressure regulator 1/4 tared 1.2

Helpful information:

Filters, regulators, filter-regulators, lubricators, pneumatic soft starters, 3-way shut-off valve, solenoid shut-off valve - 042 Series

Recommended for the treatment of compressed air and non-corrosive liquids, the 042 series modular devices are available in different products: 3-way shut-off valve, filter, regulator, filter-regulator, solenoid shut-off valve, soft starter, standard lubricator, vacuum filling lubricator...

• Characterized by a double assembly system, our modular units are practical, functional and have a very small footprint. They can be assembled in standard combined units such as FR+L, V+FR+L, F+R+L, F+L, using standard unit assembly kits.
• Made of high quality polymer, these modular units have a G1/4" connection.
• Resistant to solvents and hydrocarbons
• Use for compressed air and non-corrosive liquids
• Built-in relieving
• Materials: High quality polymer

• 3-way shut-off valve (V 042-25)
• Filter (F 042-02)
• Regulator (R 042-01)
• Filter-regulator (FR 042-04)
• Solenoid valve of sectioning (E 042-26)
• Soft starter (D 042-27)
• Standard lubricator (L 042-03)
• Vacuum filling lubricator (L 042-03VL)

• Used to cut off the air supply and at the same time to discharge the downstream circuit.
  - The blocking device is particularly useful during maintenance operations. It prevents the unauthorized pressurization of the system.
  - Possibility of wall mounting using the holes provided.
  - Discharge connection: 1/8" BSP female thread.
  - Maximum inlet pressure: 16 bar = 230 Psi = 1,60 MPa.
  - Temperature range: 5° to 50° C.
  - The device is delivered with a padlock.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 1570 Nl/min.
  - Weight : 0,155 Kg.

  Download technical datasheet

• Very good condensation separation.
  - Low pressure drop.
  - Provided with holes for wall mounting.
  - Standard filtration degree of 20 microns (on request 5 microns).
  - Manual and semi-automatic condensate draining device in the standard integrated version (SS) or automatic with float (SA).
  - Transparent polyamide bucket with reinforced resistance.
  - Quantity of condensation recovered: 22 cm3.
  - Maximum operating pressure: 16 bar = 230 Psi = 1.60 MPa.
  - Temperature range: 5 to 50°C (41 to 122°F).
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 1250 Nl/min.
  - Weight : 0,100 Kg.

  Download technical datasheet

• Modular series with reduced dimensions.
  - Membrane operation.
  - Provided with holes for wall or bracket mounting.
  - Knob with regulation locking device. On request: padlockable version.
  - Built-in automatic pressure release (relieving).
  - Pressure gauge connection: female thread 1/8" BSP.
  - Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
  - Maximum inlet pressure: 16 bar = 230 Psi = 1,60 MPa.
  - Temperature range: from 5° to 50° C.
  - Reference flow rate (P = 6,3 bar - Δp = 1 bar): 1200 Nl/min.
  - Weight : 0,125 Kg.

  Download technical datasheet

• Membrane operation.
  - Provided with holes for wall or bracket mounting.
  - Knob with regulation locking device. On request: padlockable version
  - Built-in automatic pressure release (relieving).
  - Pressure gauge connection: 1/8" BSP female thread.
  - Very good condensation separation.
  - Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
  - Standard filtration degree of 20 microns (on request 5 microns).
  - Manual and semi-automatic condensate draining device in the standard integrated (SS) or automatic float (SA) version.
  - Other functional characteristics identical to the filter.
  - Reference flow rate (P = 6.3 bar - Δp = 1 bar): 1200 Nl/min.
  - Weight: 0,160 Kg.

  Download technical datasheet

• Device allowing to cut off the power supply and at the same time to unload the downstream circuit by means of a remotely operated electro-pneumatic or pneumatic control.
  - Available with CNOMO (standard) or MICROSOL control.
  - Electrical voltage: 24V DC (standard), 24V AC or 220V AC.
  - Available on request with pneumatic control.
  - Possibility of wall mounting using the holes provided.
  - Discharge connection: 1/8" BSP female thread.
  - Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
  - Maximum working pressure: 10 bar = 145 Psi = 1 MPa.
  - Temperature range: 5° to 50° C.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 1570 Nl/min.
  - Weight : 0,189 Kg.

  Download technical datasheet

• Gradual pressurization of the system up to operating pressure.
  - Before the maximum available pressure is released, air is slowly introduced into the downstream circuit until 60% of the upstream pressure is reached.
  - The flow regulator can be used to adjust the pressure build-up time.
  - Possibility of wall mounting using the holes provided.
  - Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
  - Maximum operating pressure: 10 bar = 145 Psi = 1 MPa.
  - Temperature range: 5° to 50° C.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 1570 Nl/min.
  - Weight : 0,136 Kg.

  Download technical datasheet

• Proportional oil mist type.
  - Constant lubrication over time.
  - Guaranteed operation even at low flow rates.
  - Fine adjustment of the quantity of lubricant.
  - 360° drip display.
  - Oil filling plug.
  - Provided with holes for wall mounting.
  - Transparent polyamide cup with reinforced resistance, capacity 42 cm3.
  - Recommended oil viscosity: ISO VG32 standard.
  - Maximum working pressure : 16 bar = 230 Psi = 1,60 MPa.
  - Temperature range: 5° to 50° C (41° to 122° F).
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2060 Nl/min.
  - Weight : 0,100Kg.

  Download technical datasheet

• Indispensable when you want to load the oil quickly and safely without interrupting the normal operation of the system.
  - Filling is controlled by holding down the button on the base of the grease gun body. This causes a vacuum inside the bowl, which allows the oil to be sucked in.
  - The flow stops only when the button is released.
  - The oil level must be checked visually.
  - Minimum activation pressure: 3 bar = 40 Psi = 0,3 MPa.
  - Other functional characteristics as for the standard model.
  - Reference flow rate (P = 10 bar - Δp = 1 bar) : 2060 Nl/min.
  - Weight : 0,140 Kg.

  Download technical datasheet