Used to cut off the air supply and at the same time to discharge the downstream circuit.
- The blocking device is particularly useful during maintenance operations.
It prevents the unauthorized pressurization of the system.
- Possibility of wall mounting using the holes provided.
- Discharge connection: 1/4" BSP female thread.
- Maximum inlet pressure: 12.5 bar = 180 Psi = 1.25 MPa.
- Temperature range: 5° to 50° C.
- The device is delivered with a padlock.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 3075 Nl/min.
- Weight : 0,390 Kg.
Download technical datasheet
- Very good condensation separation.
- Low pressure drop.
- Provided with holes for wall mounting.
- Quick attachment of the cup with anti-pull-out safety mechanism.
- Standard filtration degree of 20 microns (on request 5 microns).
- Manual and semi-automatic condensate draining device in the standard integrated (SS) or automatic (SA) float version.
- Available in the microfilter versions
- 0.01μ coalescence and activated carbon oil separator.
- Polyamide bucket with reinforced resistance and external protection.
- Quantity of condensation recovered: 100 cm3.
- Maximum operating pressure: 12.5 bar = 180 Psi = 1.25 MPa.
- Temperature range: 5 to 50°C (41 to 122°F).
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 3110 Nl/min.
- Weight : 0,355 Kg.
Download technical datasheet
- Rolling diaphragm.
- Stability of the regulated pressure, even if the upstream pressure varies.
- High flow rate with low pressure drop.
- Provided with holes for wall or bracket mounting.
- Knob with regulation locking device.
- Built-in automatic pressure relief.
- Pressure gauge connection: 1/8" BSP female thread.
- Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
- Maximum inlet pressure: 12,5 bar = 180 Psi = 1,25 MPa.
- Temperature range: from 5° to 50° C.
- Reference flow rate (P = 6,3 bar - Δp = 1 bar): 2880 Nl/min.
- Weight : 0,435 Kg.
Download technical datasheet
- Rolling diaphragm.
- Stability of the regulated pressure, even if the upstream pressure varies.
- High flow rate with low pressure drop.
- Rapid elimination of excess pressure downstream.
- Provided with holes for wall or bracket mounting.
- Knob with regulation locking device.
- Built-in automatic pressure relief.
- Pressure gauge connection: 1/8" BSP female thread.
- Very good condensation separation.
- Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
- Quick coupling of the bucket with anti-extraction safety mechanism.
- Other functional characteristics identical to the standard filter.
- Reference flow rate (P = 6,3 bar - Δp = 1 bar): 2880 Nl/min.
- Weight : 0,565 Kg.
Download technical datasheet
Device allowing to cut off the power supply and at the same time to unload the downstream circuit by means of a remotely operated electro-pneumatic or pneumatic control (NF).
- Available with CNOMO (standard) or MICROSOL control.
- Electrical voltage: 24V DC (standard), 24V AC or 220V AC.
- Available with pneumatic control on request.
- Possibility of wall mounting using the holes provided.
- Connection for discharge: 1/4" BSP female thread.
- Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
- Maximum working pressure: 10 bar = 145 Psi = 1 MPa.
- Temperature range: 5° to 50° C.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 3075 Nl/min.
- Weight : 0,400 Kg.
Download technical datasheet
Gradual pressurization of the system up to operating pressure.
- Before the maximum available pressure is released, air is slowly introduced into the downstream circuit until 60% of the upstream pressure is reached.
- To adjust the pressurization time, use the built-in flow regulator.
- Provided with holes for wall mounting.
- Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
- Maximum working pressure: 10 bar = 145 Psi = 1 MPa.
- Temperature range: 5 to 50°C (41 to 122°F).
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 3075 Nl/min.
- Weight : 0,410 Kg.
Download technical datasheet
Proportional oil mist type.
- Constant lubrication over time.
- Guaranteed operation even at low flow rates.
- Fine adjustment of the quantity of lubricant.
- 360° drip display.
- Oil filling plug.
- Quick attachment of the bucket with anti-pull-out safety mechanism.
- Provided with holes for wall mounting.
- Polyamide bucket with reinforced resistance, with external protection, capacity 140 cm3.
- Recommended oil viscosity: ISO VG32.
- Maximum working pressure : 12,5 bar = 180 Psi = 1,25 MPa.
- Temperature range: 5° to 50° C (41° to 122° F).
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 3550 Nl/min.
- Weight : 0,355 Kg.
Download technical datasheet
Indispensable when you want to load the oil quickly and safely without interrupting the normal operation of the system.
- Filling is controlled by holding down the button on the base of the grease gun body.
This causes a vacuum inside the bowl, which allows the oil to be sucked in.
- The flow stops only when the button is released.
- The oil level must be checked visually.
- Minimum activation pressure: 3 bar = 40 Psi = 0.3 MPa.
- Other functional characteristics as for the standard model.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 3550 Nl/min.
- Weight : 0,395 Kg.
Download technical datasheet
